• TypeName：SL-PBE301221-X-P  SL-PBE606021-X-P  SL-PBE626221-X-P  SL-PBE601240-X-P  SL-PBE601250-X-P
• Specifications: SAA TUV CE L70B50  LM80

1. The straight down panel lamp has high luminous efficiency. The light emitted by LED light source is directly illuminated by high transmittance lens and diffusion plate to reduce the transmission link of light source in other media and the light loss in the structure design of lamps. The light efficiency of the whole lamp is high.

2. The straight down panel lamp has light weight. The structure design is more simple, without light guide plate, reducing the weight of the whole lamp.

3. Simple structure, simpler production process, high production efficiency and good product quality,

4. High cost performance: no light guide plate, saving the cost, the light way can make a small number of lamp beads to achieve the effect of uniform light from the side light-emitting panel lamp. It has high cost performance.

5. The installation method takes into account all the installation methods of the side light panel lamp.

1.SL-PBE301221-X-P

2.SL-PBE606021-X-P

3.SL-PBE626221-X-P

4.SL-PBE601240-X-P   SL-PBE601250-X-P

1.SL-PBE606021-X-P   SL-PBE626221-X-P

2.SL-PBE301221-X-P  SL-PBE601240-X-P SL-PBE601250-X-P

           Embedded I. The installation environment requires that the ceiling has a standard size ceiling or keel, and only the ceiling at the corresponding position needs to be removed for installation. Then replace the corresponding panel lights. No additional installation accessories are required.

Embedded II. The installation environment requires that the circlip is embedded, and a hole is made on the ceiling. The size of the hole is smaller than the size of the panel light, and then the light is absorbed on the ceiling by the elastic force of the spring.

Ceiling mounted. Installation environment requirements, the height of the storey is high, the ceiling is keel or solid wall structure, and the lamp is suspended in the room by the suspender (as shown in the above picture)

Ceiling type. The suspended ceiling is a solid wall structure. First install the ceiling frame on the solid wall. Then lock the panel light in the ceiling frame. (As shown below)

1. Commercial packaging

“Y” indicates the Luminance Efficacy R=220-230lm/W S=190-200lm/W P=170-180lm/W T=150lm/W H=120lm/WN=100lm/W  

• TypeName：SL-PBE301221-X-P  SL-PBE606021-X-P  SL-PBE626221-X-P  SL-PBE601240-X-P  SL-PBE601250-X-P
• Specifications: SAA TUV CE L70B50  LM80

1. The straight down panel lamp has high luminous efficiency. The light emitted by LED light source is directly illuminated by high transmittance lens and diffusion plate to reduce the transmission link of light source in other media and the light loss in the structure design of lamps. The light efficiency of the whole lamp is high.

2. The straight down panel lamp has light weight. The structure design is more simple, without light guide plate, reducing the weight of the whole lamp.

3. Simple structure, simpler production process, high production efficiency and good product quality,

4. High cost performance: no light guide plate, saving the cost, the light way can make a small number of lamp beads to achieve the effect of uniform light from the side light-emitting panel lamp. It has high cost performance.

5. The installation method takes into account all the installation methods of the side light panel lamp.

1.SL-PBE301221-X-P

2.SL-PBE606021-X-P

3.SL-PBE626221-X-P

4.SL-PBE601240-X-P   SL-PBE601250-X-P

1.SL-PBE606021-X-P   SL-PBE626221-X-P

2.SL-PBE301221-X-P  SL-PBE601240-X-P SL-PBE601250-X-P

           Embedded I. The installation environment requires that the ceiling has a standard size ceiling or keel, and only the ceiling at the corresponding position needs to be removed for installation. Then replace the corresponding panel lights. No additional installation accessories are required.

Embedded II. The installation environment requires that the circlip is embedded, and a hole is made on the ceiling. The size of the hole is smaller than the size of the panel light, and then the light is absorbed on the ceiling by the elastic force of the spring.

Ceiling mounted. Installation environment requirements, the height of the storey is high, the ceiling is keel or solid wall structure, and the lamp is suspended in the room by the suspender (as shown in the above picture)

Ceiling type. The suspended ceiling is a solid wall structure. First install the ceiling frame on the solid wall. Then lock the panel light in the ceiling frame. (As shown below)

1. Commercial packaging

“Y” indicates the Luminance Efficacy R=220-230lm/W S=190-200lm/W P=170-180lm/W T=150lm/W H=120lm/WN=100lm/W  

G Series

• TypeName：LED Street Light G Series
• Model: SL-STA00-30Y-XX-G
• Specifications: CE ROHS

• Description:

• Model name description: SL-STA00-30Y-XX-G;

• “SL” indicates the name of company producing the product;

• “ST” indicates the product is a LED Sreet Light;

• “A00” indicates the voltage of the product;

• “30” indicates the power of the product,it can be 50、70、90、150、200；

• “Y” indicates the colour temperature of the product. “Y” can be N=3000K,M=3500K,L=4000K,K=4500K,C=5000K,H=5700K represents color temperature；

• Where“ XX ”represent light angle, it can be T I,T II,T III,T IV,T V;

• “G” indicates the shape size.

Light Efficiency up to 140lm/W Street Light G Series can save 90% energy with its high efficacy, compared with other lighting fixture with the same watt , which makes it to be a high standard luminaire in the market.     IP65 & IK10     Photocell The light operating depends on the ambient luminance. When it is dark or dawn, it will   lighten with a suitable luminance automatically.

Test Item	Structure Classification	Testing Conditions	Testing parameters	Testing Time	Limiting Value
Hipot test	Class I	input-shell	1000+2U (AC)	1min	10mA Max.
	Class II	input-shell	2000+4U (AC)	1min	10mA Max.
	Class III	input-shell	500Vdc	1min	10mA Max.
Insulation Resistance	Class I	input-shell	500Vdc	1min	2MΩ Min.
	Class II	input-shell	500Vdc	1min	4MΩ Min.
	Class III	input-shell	100Vdc	1min	1MΩ Min.
Leakage Current	Class I	input-shell	220V/50Hz	10S	0.5mA Max.
	Class II	input-shell	220V/50Hz	10S	1.0mA Max.
Ground Resistance	Class I	Grounding wirmetal shell	10A	1min	500mΩ Max.

Product benefits

ELECTRICAL DATA

• Model No. CFLS-1570-DA
• Outer Dimensions 1500*76*70mm
• Input Power 70W
• Dip Switch to 55/60/65/70W
• Input Voltage 220 – 240VAC
• Input Current 0.4A max
• Mains Frequency 50/60HZ
• PF (at 230 V, 50 Hz) 0.9
• Dimming DALI2  dimming
• Type of Protection IP20
• Ambient Temperature -25 – 40°C
• Storage Temperature -40 – 85°C
• Emergency Option Support external emergency or built-in battery
• Warranty 5 years

PHOTOMETRICAL DATA

• CCT 2700-6500K
• Lumen 12600lm
• Lumens Efficiency 180lm/W
• CRI 80Ra

Product benefits

ELECTRICAL DATA

• Model No. CFLS-1550-DA
• Outer Dimensions 1500*76*70mm
• Input Power 50W
• Dip Switch to 35/40/45/50W
• Input Voltage220 – 240VAC
• Input Current 0.3A max
• Mains Frequency 50/60HZ
• PF (at 230 V, 50 Hz) 0.9
• Dimming DALI2  dimming
• Type of Protection IP20
• Ambient Temperature -25 – 40°C
• Storage Temperature -40 – 85°C
• Emergency Option Support external emergency or built-in battery
• Warranty 5 years

PHOTOMETRICAL DATA

• CCT 2700-6500K
• Lumen 9000lm
• Lumens Efficiency 180lm/W
• CRI 80Ra

Product benefits

ELECTRICAL DATA

• Model No. CFLS-1570
• Outer Dimensions 1500*76*70mm
• Input Power 70W
• Dip Switch to 55/60/65/70W
• Input Voltage 220 – 240VAC
• Input Current 0.4A max
• Mains Frequency 50/60HZ
• PF (at 230 V, 50 Hz, full load) 0.9
• Dimming NON-dimming
• Type of Protection IP20
• Ambient Temperature -25 – 40°C
• Storage Temperature -40 – 85°C
• Emergency Option Support external emergency or built-in battery
• Warranty 5 years

PHOTOMETRICAL DATA

• CCT 2700-6500K
• Lumen 12600lm
• Lumens Efficiency 180lm/W
• CRI 80Ra

Product benefits

ELECTRICAL DATA

• Model No. CFLS-1570
• Outer Dimensions  1500*76*70mm
• Input Power  70W
• Dip Switch to  55/60/65/70W
• Input Voltage 220 – 240VAC
• Input Current 0.4A max
• Mains Frequency 50/60HZ
• PF (at 230 V, 50 Hz, full load) 0.9
• Dimming NON-dimming
• Type of Protection IP20
• Ambient Temperature -25 – 40°C
• Storage Temperature -40 – 85°C
• Emergency Option Support external emergency or built-in battery
• Warranty 5 years

PHOTOMETRICAL DATA

• CCT 2700-6500K
• Lumen 12600lm
• Lumens Efficiency 180lm/W
• CRI 80Ra

LED Street Light SL-ST07 30W-200W-ST07 LED Street Light G Series

• Description:
• Model name description: SL-STA00-30Y-XX-G;
• “SL” indicates the name of company producing the product;
• “ST” indicates the product is a LED Sreet Light;
• “A00” indicates the voltage of the product;
• “30” indicates the power of the product,it can be 50、70、90、150、200；
• “Y” indicates the colour temperature of the product. “Y” can be N=3000K,M=3500K,L=4000K,K=4500K,C=5000K,H=5700K represents color temperature；
• Where“ XX ”represent light angle, it can be T I,T II,T III,T IV,T V;
• “G” indicates the shape size.

Light Efficiency up to 140lm/W Street Light G Series can save 90% energy with its high efficacy, compared with other lighting fixture with the same watt , which makes it to be a high standard luminaire in the market.     IP65 & IK10     Photocell The light operating depends on the ambient luminance. When it is dark or dawn, it will   lighten with a suitable luminance automatically.

Test Item	Structure Classification	Testing Conditions	Testing parameters	Testing Time	Limiting Value
Hipot test	Class I	input-shell	1000+2U (AC)	1min	10mA Max.
	Class II	input-shell	2000+4U (AC)	1min	10mA Max.
	Class III	input-shell	500Vdc	1min	10mA Max.
Insulation Resistance	Class I	input-shell	500Vdc	1min	2MΩ Min.
	Class II	input-shell	500Vdc	1min	4MΩ Min.
	Class III	input-shell	100Vdc	1min	1MΩ Min.
Leakage Current	Class I	input-shell	220V/50Hz	10S	0.5mA Max.
	Class II	input-shell	220V/50Hz	10S	1.0mA Max.
Ground Resistance	Class I	Grounding wirmetal shell	10A	1min	500mΩ Max.

LED Street Light SL-ST06 30W-200W-LED Street Light F Series

• TypeName：LED Street Light F Series
• Model: SL-STA00-30Y-XX-F
• Specifications: CE ROHS

ST06 LED Street Light F Series 

Performance Parameters
● Luminous Efficiency:  170lm/W
● Input Voltage: 100-240VAC 50/60Hz
● Power Consumption: 30W/50W/70W/100W/120W/150W/200W
● Color Temperature: 4000K 5000K
● Color Rendering Index:Ra>70 and Ra>80
● PF>0.95
● Beam Angle: TYPE II / TYPE III
● Working Temperature: -40~45℃
● LED Type: 5050
● Lifespan: 50,000hours

Specification

 

 

 

Model	30W		50W		70W		100W		120W		150W		200W
PF	>0.95
Input Voltage(V)	100-240VAC
CRI	Ra70	Ra80	Ra70	Ra80	Ra70	Ra80	Ra70	Ra80	Ra70	Ra80	Ra70	Ra80	Ra70	Ra80
Efficacy (lm/W)±5%	170	160	170	160	170	160	170	160	170	160	170	160	170	160
Lumen Output±5%	5100	4800	8500	8000	11900	19200	17000	16000	20400	19200	25500	24000	34000	32000
CCT (K)	4000K / 5000K
Dimming	Non-Dimming (Default) / 1-10V Dimming
Intelligent Control	Photo cell / DALI Control
Beam Angle	TYPE II / TYPE III
Material	Die-Cast + Glass
Operating Tenperature	-40℃ ~ 45℃
Humidity	10%~90%
Installation	POLE
LED Type	5050
Power Supply	ZH/SS
Surge Protection	4kV line-line, 6kV line-earth
Certification	CE / RoHS / SAA
IP Rate	IP65
Warranty	5 Years

 

Packing

 

Model No.	Power(W)	Size(mm)	Carton Size(mm)	G.W/1PCS±0.2KG
SL-STA00-30Y-XX-F	30W	L396(15.59in)*W185(7.28in)*H101(3.97in)	L620*W280*H155	4.94KG
SL-STA00-50Y-XX-F	50W	L431(16.96in)*W233(9.17in)*H99(3.89in)	L630*W280*H155	4.94KG
SL-STA00-70Y-XX-F	70W	L481(18.93in)*W272(10.7in)*H99(3.89in)	L670*W310*H155	6.50KG
SL-STA00-100Y-XX-F	100W	L481(18.93in)*W272（10.7in)*H99(3.89in)	L670*W310*H155	6.50KG
SL-STA00-120Y-XX-F	120W	L481(18.93in)*W272(10.7in)*H99(3.89in)	L670*W310*H155	6.70KG
SL-STA00-150Y-XX-F	150W	L622(24.00in)*W301(11.85in)*H103(4.05in)	L820*W340*H155	8.90KG
SL-STA00-200Y-XX-F	200W	L622(24.00in)*W301(11.85in)*H103(4.05in)	L820*W340*H155	9.10KG

Description:

• Model name description: SL-STA00-30Y-XX-F.
• “SL” indicates the name of company producing the product;
• “ST” indicates the product is a LED Sreet Light;
• “A00” indicates the voltage of the product;
• “30” indicates the power of the product,it can be 50、70、100、120、150、200；
• “Y” indicates the colour temperature of the product. “Y” can be N=3000K,M=3500K,L=4000K,K=4500K,C=5000K,H=5700K
• represents color temperature；
• Where“ XX ”represent light angle, it can be T I,T II,T III,T IV,T V;

“F” indicates the shape size.

Structure drawing

StructurePerformance

Housing	Die-Cast
Cover:	Glass
Cable Length:	400mm
IP Rate:	IP65
IK Rate:	IK08

Smart Structure Free-tool MaintenanceIt is separated by two parts. There is a button at the roof cover, push it and unlock the driver. With this smart structure, only one person can finish it without any tools in one minute to maintain.

Beam angle

 

Efficiency up to 170lm/w

This is a world class street light in terms of easy maintenance, high lumen efficiency, much energy saving as well as consideration and respect for the environment.

 

Full Power for Various Roads
ST06 has four sizes that compatible with different power which happens for all kinds of roads.

Structure drawing

Test Item	Structure Classification	Testing Conditions	Testing parameters	Testing Time	Limiting Value
Hipot	Class I	input-shell	1000+4U(AC)	1min	10mA Max.
	Class I	input-shell	2000+4U(AC)	1min	10mA Max.
	Class III	input-shell	500Vdc	1min	10mA Max.
Insulation Resistance	Class I	input-shell	500Vdc	1min	2MΩ Min.
	Class II	input-shell	500Vdc	1min	4MΩ Min.
	Class III	input-shell	100Vdc	1min	1MΩ Min
Leakage Current	Class I	input-shell	220V/50Hz	10S	0.5mA Max.
	Class II	input-shell	220V/50Hz	10S	1.0mA Max.
Cround Resistance	Class I	Grounding wirmetal shell	10A	1min	500mΩ Max.

Product Certification

Certification Categories	Conform to the standard specification	Meet Certified	Certified
CE	EN60598-1; EN60598-2-1; EN62493; EN55015; EN61000-3-2; EN61000-3-3; EN61547; EN62471	√	√
SAA	IEC60598-2-1:1979(First Edition)+A1:1987 used in conjunction With IEC60598-1:2014(Eighth Edition)	√	√
ROHS	2011/65/EU directive (RoHS 2.0)	√
Energy Star	ENERGY STAR® Program Requirements Product Specification for Luminaires (Light Fixtures) Eligibility Criteria Version 2.0

Case

• TypeName：SL-PBE301221-X-P  SL-PBE606021-X-P  SL-PBE626221-X-P  SL-PBE601240-X-P  SL-PBE601250-X-P
• Specifications: SAA TUV CE L70B50  LM80

1. The straight down panel lamp has high luminous efficiency. The light emitted by LED light source is directly illuminated by high transmittance lens and diffusion plate to reduce the transmission link of light source in other media and the light loss in the structure design of lamps. The light efficiency of the whole lamp is high.

2. The straight down panel lamp has light weight. The structure design is more simple, without light guide plate, reducing the weight of the whole lamp.

3. Simple structure, simpler production process, high production efficiency and good product quality,

4. High cost performance: no light guide plate, saving the cost, the light way can make a small number of lamp beads to achieve the effect of uniform light from the side light-emitting panel lamp. It has high cost performance.

5. The installation method takes into account all the installation methods of the side light panel lamp.

1.SL-PBE301221-X-P

2.SL-PBE606021-X-P

3.SL-PBE626221-X-P

4.SL-PBE601240-X-P   SL-PBE601250-X-P

1.SL-PBE606021-X-P   SL-PBE626221-X-P

2.SL-PBE301221-X-P  SL-PBE601240-X-P SL-PBE601250-X-P

           Embedded I. The installation environment requires that the ceiling has a standard size ceiling or keel, and only the ceiling at the corresponding position needs to be removed for installation. Then replace the corresponding panel lights. No additional installation accessories are required.

Embedded II. The installation environment requires that the circlip is embedded, and a hole is made on the ceiling. The size of the hole is smaller than the size of the panel light, and then the light is absorbed on the ceiling by the elastic force of the spring.

Ceiling mounted. Installation environment requirements, the height of the storey is high, the ceiling is keel or solid wall structure, and the lamp is suspended in the room by the suspender (as shown in the above picture)

Ceiling type. The suspended ceiling is a solid wall structure. First install the ceiling frame on the solid wall. Then lock the panel light in the ceiling frame. (As shown below)

1. Commercial packaging

“Y” indicates the Luminance Efficacy R=220-230lm/W S=190-200lm/W P=170-180lm/W T=150lm/W H=120lm/WN=100lm/W  

Specifications:
● Frosted Cover: 160lm/w；
● Clear Cover:170lm/W
● Input Voltage:AC100-240V  50/60Hz
● Power6W/9W/12W/18W/20W/25W/30W/
● Color temperature:3000K  4000K  5000K  6000K
● Color Rendering Index: >80
● Power Factor:>0.95
● Beam Angle:140°
● Working Temperature:-20~48℃
● Storage Temp:-40~80℃
● Environment Humidity:＜95%
● LED Type:SMD2835
● Lifespan:>50,000hours
● On-off  times:>100,000 Times
● Rotatable end cap:Available

Fluorescent tube replacment，e.g. Office, Retail store, Classroom, Commercial & Industrial

Specifications:

Working Temperature: -20℃-48℃

Product Features:

*Remarks: The same model also can do “3000K” ,”4000K”,Only change W between to N,L

S803T T8 160Lm/w Tube Lighting

S803T T8 140Lm/w Tube Lighting

S803T T8 110Lm/w Tube Lighting

Installation

Case

General fluorescent tube replacment e.g. Offics,Retail,Education, Commercial & Industrial

PDF Download

TUV-EMC	TUV-LVD	RoHS	SAA